track IP address

Getting Ip's:--

To see the ip all computers you are connected to (web servers, people attempting to hack into your computer).
Go to dos (start>run>type command) and run the netstat command. Type netstat /? for details.

Type netstat -r at the command prompt to see the ip of all computers you are connected to

In MSN (and other programs) when you are chatting to someone everything you type goes through the MSN servers first (they act as a proxy) so you see their ip rather than who you are chatting to. You can get round this by sending them a file as MSN doesn't send file through its proxy.
When you type the netstat -r (or -a for a different view) the ip's are under the foreign address table. The ports are seperated by a : . Different programs use different ports, so you can work out which ip's are from which program.
Connecting to other computers and what ports are:--

Servers send information. Clients retrieve. Simple.
Windows comes with a built in program to connect to other computers called telnet.
To start Windows telnet Start menu> Run> type Telnet. Click connect> remote system
Ports are doors into computers. Hosts are computer names
(ip number or a name that is translated into the ip automatically)
Different programs open different ports, but they always open the same ports so other computers know which port to connect to. You can get a port list listing all the different ports, but a basic one is:
11 :- Sends info on the computer
21 :- FTP (File transfer program)
23 :- Telnet (Login to the computers command line)
25 :- Smtp (Sends mail)
80 :- Http (Web pages)
There are thousands of different programs using different ports. You can get programs called portscanners which check a computer for all ports up to a certain number, looking for ways in. You can portscan a computer looking for ways-in.
Anyway, back to telnet.
Type http://www.yahoo.com/ as the host and port as 80 the click connect.
If nothing happens, you're in. Wow. You are connected to Yahoo's server.


You can now type http commands (you are connected to an http server, so it supports http commands). Ie. on an ftp server you can type open and it will do something. On an http server it will just wonder what the hell you are on about.
Type get / http/1.0 then press enter twice to get the file on the server at / (try /index.html) etc.)
Allowing dos and regedit in a restricted Windows
See http://blacksun.box.sk/tutorials/format.ph...le=windows.html for some very cool tactics.
A very simple tactic I found after accidentally locking myself out of dos and regedit is to open notepad and type the following:
REGEDIT4
[HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionPoliciesWinOldApp]
"Disabled"=dword:0
[HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionPoliciesSystem]
"DisableRegistryTools"=dword:0

Save it as something.reg then run it. Simple.









ip adress detail::::::::;








IP ADDRESS DETAILS


In here I have figure out some very easy but cool ways to trace out the geographical location and various other infos like ISP details etc of a remote computer using its IP.

Well I guess its one of the most important must learn manul for boys out there if you want to impress your friends particularly gals whom you’ll meet online in a chat room and tell them their geographical locations and ISP details and make them surprised and impressed .

In the practical execution of this manual you don’t have to work much as it is very simple only you have to use your brain to understand some symbols and some format of expressions and use your IQ to execute things the right way.




What is IP and how to get the IP of a remote system::



Getting the IP or Internet Protocol of a remote system is the most important and the first step of hacking into it. Probably it is the first thing a hacker do to get info for researching on a system. Well IP is a unique number assigned to each computer on a network. It is this unique address which represents the system on the network. Generally the IP of a particular system changes each time you log on to the network by dialing to your ISP and it is assigned to you by your ISP. IP of a system which is always on the network remains generally the same. Generally those kind of systems are most likely to suffer a hacking attack because of its stable IP. Using IP you can even execute system commands on the victim’s computer.
Lets take the example of the following IP address: 202.144.49.110 Now the first part, the numbers before the first decimal i.e. 209 is the Network number or the Network Prefix.. This means that it identifies the number of the network in which the host is. The second part i.e. 144 is the Host Number that is it identifies the number of the host within the Network. This means that in the same Network, the network number is same. In order to provide flexibility in the size of the Network, here are different classes of IP addresses
Address Class Dotted Decimal Notation Ranges

Class A ( /8 Prefixes) 1.xxx.xxx.xxx through 126.xxx.xxx.xxx

Class B ( /16 Prefixes) 128.0.xxx.xxx through 191.255.xxx.xxx

Class C ( /24 Prefixes) 192.0.0.xxx through 223.255.255.xxx



The various classes will be clearer after reading the next few lines.



Each Class A Network Address contains a 8 bit Network Prefix followed by a 24-bit host number. They are considered to be primitive. They are referred to as "/8''s" or just "8's" as they have an 8-bit Network prefix.

In a Class B Network Address there is a 16 bit Network Prefix followed by a 16-bit Host number. It is referred to as "16's".



A class C Network address contains a 24-bit Network Prefix and a 8 bit Host number. It is referred to as

"24's" and is commonly used by most ISP's.



Due to the growing size of the Internet the Network Administrators faced many problems. The Internet routing tables were beginning to grow and now the administrators had to request another network number from the Internet before a new network could be installed at their site. This is where sub-netting came in.



Now if your ISP is a big one and if it provides you with dynamic IP addresses then you will most probably see that whenever you log on to the net, your IP address will have the same first 24 bits and only the last 8 bits will keep changing. This is due to the fact that when sub-netting comes in then the IP Addresses structure becomes:



xxx.xxx.zzz.yyy



where the first 2 parts are Network Prefix numbers and the zzz is the Subnet number and the yyy is the host number. So you are always connected to the same Subnet within the same Network. As a result the first 3 parts will remain the same and only the last part i.e.
yyy is variable.

***********************



For Example, if say an ISP xyz is given the IP: 203.98.12.xx Network address then you can be awarded any IP, whose first three fields are 203.98.12. Get it?



So, basically this means that each ISP has a particular range in which to allocate all its subscribers. Or in other words, all subscribers or all people connected to the internet using the same ISP, will have to be in this range. This in effect would mean that all people using the same ISP are likely to have the same first three fields of their IP Addresses.



This means that if you have done a lot of (By this I really mean a lot) of research, then you could figure out which ISP a person is using by simply looking at his IP. The ISP name could then be used to figure out the city and the country of the person. Right? Let me take an example to stress as to how cumbersome but easy (once the research is done) the above method can be.



In my country, say there are three main ISP’s:



ISP Name Network Address Allotted



ISP I 203.94.47.xx

ISP II 202.92.12.xx

ISP III 203.91.35.xx



Now, if I get to know the IP of an e-pal of mine, and it reads: 203.91.35.12, then I can pretty easily figure out that he uses ISP III to connect to the internet. Right? You might say that any idiot would be able to do this. Well, yes and no. You see, the above method
of finding out the ISP of a person was successful only because we already had the ISP and Network Address Allotted list with us. So, what my point is, that the above method can be successful only after a lot of research and experimentation. And, I do think such research can be helpful sometimes.



Also, this would not work, if you take it all on in larger scale. What if the IP that you have belongs to someone living in a remote igloo in the North Pole? You could not possibly get the Network Addresses of all the ISP’s in the world, could you? If yes please send it to me J.



Well now I guess you have pretty good knowledge about what an IP is and what you can do by knowing the IP of a remote system. Now lets come to the point of finding out the IP of remote system.

Well you can easily figure out the IP of a remote system using the netstat utility available in the microsoft’s version of DOS. The netstat command shows the connections in which your system is engaged to and the ports they are using. Suppose you are checking your mail in hotmail and you want to find out the IP of msn. All you need to do is to open a dos window (command.com) and type netstat. You will see all the open connections of your system. There you will see something :



Proto Local Address Foreign Address State

TCP abhisek:1031 64.4.xx.xx:80 ESTABLISHED



Now you got the IP address of hotmail ass 64.4.xx.xx .

Similarly you can figure out the IP address of most http or ftp connections.



To know your own IP type the following command in a dos windows

C:\netstat –n

[this commands converts the IP name into IP addresses]

this is what you will probably see on typing the above command
Proto Local Address Foreign Address State

TCP 203.xx.251.161:1031 194.1.129.227:21 ESTABLISHED

TCP 203.xx.251.161:1043 207.138.41.181:80 FIN_WAIT_2

TCP 203.xx.251.161:1053 203.94.243.71:110 TIME_WAIT
TCP 203.xx.251.161:1058 194.1.129.227:20 TIME_WAIT

TCP 203.xx.251.161:1069 203.94.243.71:110 TIME_WAIT

TCP 203.xx.251.161:1071 194.98.93.244:80 ESTABLISHED

TCP 203.xx.251.161:1078 203.94.243.71:110 TIME_WAIT



Here 203.xx.251.161 is your IP address.



Now lets clarify the format used by netstat :



Proto : It shows the type of protocol the connection with the remote system is using.

Here TCP (transmission control protocol) is the protocol used by my system to connect to other systems.



Local Address : It shows the local address ie the local IP. When the netstat command is executed without –n switch then the name of the local system is displayed and when the netstat is executed with –n switch then the IP of the local system is displayed. Here you can also find out the port used by the connection.

xxx.yyy.zzz.aaa:1024

in this format you will see the local address. Here 1024 is the port to which the remote system is connected in your system



Foreign Address :: It shows the IP address of the remote system to which your system is connected. In this case also if the netstat command is excuted with –n switch then you directly get the IP of the victim but if the netstat is executed without –n switch then you will get the address of the remote system. Something like



C:\netstat

Proto Local Address Foreign Address State

TCP abhisek:1031 msgr.lw4.gs681.hotmail.com:80 ESTABLISHED



Here msgr.lw4.gs681.hotmail.com is the address of the foreign system . putting this address in any IP lookup program and doing a whois lookup will reveal the IP of the remote system.



Note: The port to which your system is connected can be found from this in the same way as I have shown in the case of local address. The difference is that, this is the port of the remote system to which your computer is connected to.

Below I have produced a list of ports and popular services generally found to be running.

21 :: FTP port

80 :: http port

23 :: Telnet port